John Deere Bulldozer Face Seals in Portland - No matter if you're on the lookout for stick cylinders, swing bearings, idlers, undercarriages, or some other part for your own equipment, our Portland associates can assist. We enjoy easy access to lots of suppliers across the entire world and can certainly source all your new and used equipment requirements.
This particular series has a load capacity of 8 to 12 tons. The LC1100 cranes provide a 5 to 8 ton load capacity, while the larger LC2100 model supports loads from 12 to 48 tons. Furthermore, the LC1600 family brings together the advantages of both series that shares various factors.
Linden Comansa's Flat-Top modular system was designed for the LC 2100, and is currently in all the tower cranes built by the company. This series includes a lot of innovations in the specific equipment.
The LC 2100 series has 4 Flat-Top crane models: the 21 LC 290, 21 LC 550 and the 21 LC 400. The latest addition to the series is the 21 LC 750. The 21 LC 750 crane is the largest in the series. It is outfitted with eighty meters of jib length and 7 tons of jib-end load. This tower crane provides a maximum load of forty eight tons.
Comansa offers the LC3000 series that is formed by 2 models, the 30 LC 1400 and the 30 LC 1100 and each one is available with 3 different versions depending on their maximum load capacity. The ranges of load capacities are 32, forty eight and sixty four tons or ten thousand five hundred fifty; one hundred five thousand eight hundred twenty and one hundred forty one thousand ninety pounds. The biggest Flat-Top tower cranes have mainly been designed for heavy industry, mining and construction applications and public works.
Pneumatic forklifts are common in warehouse and shipping operations. Also referred to as pallet trucks or pump trucks, they are used to move things and supplies around on wooden pallets utilizing metal forks which are mounted on a wheeled counterweight. The counterweight includes a pump which lifts the forks off the ground. A pallet truck is intended to be operated by one individual.
To be able to avoid loosing control while raising heavy loads, pallet trucks should always be operated carefully. Equipment should be checked prior to operating. Clear the wheels area of any obstacle. Check that the handle turns smoothly. The pallet should be stacked carefully to guarantee that nothing would fall off during transportation.
On the end of the pallet truck's handle, squeeze the level situated on the inside of the metal loop to lower the forks and release the air in the pump. The forks could then be pushed into the pallet slots. The forks should be centered to guarantee even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not raise the pallet very high or the forklift could unbalance.
